> Sapphire Substrates for LED: The Big Move Toward 6" Has Already Started
Thursday, July 28, 2011, 8:00 AM PDT
Hosted by Yole Développement
||Dr. Philippe Roussel, LED Senior Project Manager, Yole Développement
||Raja M. Parvez, President, Chief Executive Officer and Director, Yole Développement
To register for this event, please fill out and submit the following form.
Abstract and Speaker info below:
LEDs have already reached a sufficient price/performance level to enable massive adoption in LCD display applications. General lighting application will be the next and largest market for LED light sources. However, for most of the applications, LEDs are still too expensive. The industry consensus points toward the need for an additional 10x reduction in packaged LED cost of ownership expressed in $/lumen in order to compete broadly with incumbent technologies and enable massive adoption in most lighting application segments. To answer this demand, huge efforts have to be made all over the value chain, from the sapphire substrate to the final luminaire cost structure. Increasing the substrate diameter is one of these enabling technologies. 2009 saw the introduction of first industrial tools running 6” diameter for LED manufacture and this industry is now clearly moving toward larger substrate diameter. C-plan 3” and 4” already represent about 50% of the total surface shipped in 2011 and 6” is now reaching 5% of the production, thanks to companies such as LG, Samsung, Showa Denko, Osram or Lumileds who all moved to 6”.
This webcast will highlight:
- Main economics of the LED business and linked demand for sapphire substrates
- Including market metrics from 2009 to 2015 and in some cases to 2020
- Status and forecast of companies plan to move to 6” substrate
- Brief overview of tool makers and offer some perspective on competitive substrates such as SiC and Silicon
- Estimation of production cost of 6” sapphire using different growth methods (Kyro, CZ off-axis, CZ on-axis, EFG)
- Forecast and market metrics of the 6” sapphire wafer business to 2020
Philippe Roussel, Ph.D holds a Ph-D in Integrated Electronics Systems from the National Institute of Applied Sciences (INSA) in LYON. He joined Yole Développement in 1998 and is senior manager of the Compound Semiconductors technology & economical market analysis department.
Raja M. Parvez has served as our president and chief executive officer of Rubicon Technology since January 2006 and as a member of our board of directors since August 2006. Prior to joining us, Mr. Parvez served as chief operating officer, chief manufacturing officer and vice president at CyOptics, Inc., a designer, developer and marketer of indium phosphide optical chips and components for access, metro and long-haul communications systems from July 2001 through December 2005. From July 2000 to July 2001, Mr. Parvez was president and vice president of manufacturing at Optigain, Inc. a subsidiary of FiTel Technologies, a designer and manufacturer of amplifiers for communications systems. From 1984 to 2000, he was at Lucent Technologies, where he served as distinguished and consulting member of the technical staff. His focus was on operational excellence for Lucent-Optoelectronics products, including indium phosphide and lithium niobate components. Mr. Parvez holds a BS in mechanical engineering from the University of Peshawar, an MS in industrial engineering and an MS in management, each from Polytechnic University in New York.