| | | | |  6:00 am - 4:30 pm | Registration | | 7:00 am - 8:00 am | Welcome Coffee and Tea | | 8:00 am - 9:15 am | Welcome and Keynote Address | | 8:45 am - 9:30 am | KN1: The Continuous Pursuit of Asset Reliability
Malcolm Osenton, Director - Reliability, The Mosaic Company | | 9:30 am - 12:30 pm | WS1: Practical vibration analysis workshop: Interactive and challenging case studies (Part 1 - Part 2 required below) by Scott Dow
Scott Dow, Senior Instructor, Mobius Institute | AMWS2: Time signal analysis of ultrasound signals workshop by Tom Murphy
Tom Murphy, Corporate Training Manager, SDT Ultrasound Solutions | AMWS3: Rolling bearing applications, failure analysis & reliability improvement - missing links by Darren Kenworthy
Darren Kenworthy, Engineering Manager, SKF Australia Pty Ltd | | | 12:30 pm - 1:30 pm | Lunch | | 1:30 pm - 4:30 pm | WS1: Practical vibration analysis workshop: Interactive and challenging case studies (Part 2 - Part 1 required above) by Scott Dow
Scott Dow, Senior Instructor, Mobius Institute | PMWS2: An animated introduction to fluid-film bearing vibration analysis workshop by Jason Tranter
Jason Tranter, Managing Director, Mobius Institute | PMWS3: Improving electrical reliability by implementing a motor diagnostic and testing program by William Kruger
William Kruger, Technical & Training Manager, ALL-TEST Pro, LLC | | | 4:30 pm - 6:00 pm | Welcome Reception in Exhibition Hall |
| | | | | | 6:00 am - 4:30 pm | Registration | | 7:00 am - 8:00 am | Morning Coffee and Tea | | 8:00 am - 9:15 am | Welcome and Keynote Address | | 8:30 am - 9:15 am | Keynote Presentation by David Parkin
David Parkin, Champion AFL Coach and Business Leader | | 9:30 am - 10:15 am | 1S1: A visual introduction to modal analysis
Jason Tranter, Managing Director, Mobius Institute | 2S1: Used oil analysis as both a condition monitoring & productivity improvement tool
Brenden Tymensen, Sr. Sales Advisor, ExxonMobil | 3S1: Bearing failures and remedies
Andreas Pieper, Engineering & Quality Manager, Schaeffler Australia | | | 10:15 am - 10:45 am | Morning Coffee and Tea Break in Exhibition Hall | | 10:45 am - 11:30 am | 1S2: Case Study: Modal balancing and over speed testing of large turbo-alternator rotors.
Simon Hurricks, Predictive Maintenance Engineer, Genesis Energy Ltd | 2S2: A Most Unusual Hydro Generation Problem - 93m below water
Matthew Fallow, Founder, Asset Quality | 3S2: High definition gearbox monitoring
Tim Sundstrom, Manager of Strategic Sales & Application, SPM Instrument AB | | | 11:45 am - 12:30 pm | 1S3: Continuous Monitoring Solution over the Internet for Heavy Earth Moving Equipment
David Dick, Condition Monitoring Technician, Rio Tinto
Paulo Cipriano, Global CBM Services CoE Cluster Manager, SKF Australia Pty Ltd | 2S3: Case Study: The integration of ultrasonic acoustic and vibration techniques to enhance our rotating equipment CM program
David Kauppila, Regional Reliability Manager, Wilmar Sugar, Herbert River Mills | 3S3: Using Root Cause Analysis to Solve Equipment Problems
Peter Todd, Reliability Engineer, ARIA | | | 12:30 pm - 1:30 pm | Lunch in Exhibition Hall | | 1:30 pm - 2:15 pm | 1S4: Case Study: Gearbox failure
Wendy Kera, Principal Defect Elimination - Condition Monitoring, BHP Billiton | 2S4: Smart Reliability CBM & Fourth Industrial Revolution
Sven Fleischer, Area Sales Manager, PRUFTECHNIK S.E.A. PTE LTD | 3S4a: (90 min.) A quick introduction to the other condition monitoring technologies
Jason Tranter, Managing Director, Mobius Institute | | | 2:30 pm - 3:15 pm | 1S5: Do we really have to take averages or are we just wasting our time?
Clyde Volpe, Owner, Vibration Institute of Australia | 2S5: Case Study: Connecting Asset Health to Asset Strategies in real time
Graham Forrester, Managing Director, NVMS Solutions | 3S4b: (90 min.) cont'd. A quick introduction to the other condition monitoring technologies
Jason Tranter, Managing Director, Mobius Institute | | | 3:15 pm - 3:45 pm | Afternoon Coffee and Tea Break in Exhibition Hall | | 3:45 pm - 4:30 pm | 1S6: Evolution of Condition Monitoring Program
Malcolm Osenton, Director - Reliability, The Mosaic Company | 2S6: Oil condition monitoring and varnish mitigation for steam/gas turbines and compressors
Pierre Vanderkelen, VP Intl Sales, Fluitec
Wayne Buckland, Owner, CTG Lubrication Services | 3S5: Case Study: Low Speed Bearing Lubrication, Monitoring & Reliability
Peter Todd, Reliability Engineer, ARIA | | | 4:30 pm - 5:30 pm | Reception in Exhibition Hall | | 6:00 pm - 8:30 pm | Evening Dinner & Entertainment |
| | | | | | 6:00 am - 3:00 pm | Registration | | 7:00 am - 8:00 am | Morning Coffee and Tea | | 8:00 am - 8:45 am | KN3: Making Vibration Analysis Count
Jason Tranter, Managing Director, Mobius Institute | | 9:00 am - 9:45 am | 1S7a: (90 min.) Rolling element bearings - Why the harmonics, why the side bands
Clyde Volpe, Owner, Vibration Institute of Australia | 2S7: CM Program KPIs- Key to survival and growth of CM programs
Tarun Motwani, Sr. Engineer- CM & Lubrication, Visy Paper | 3S6: Accurate condition monitoring of ultra-low and low speed machines
Tim Sundstrom, Manager of Strategic Sales & Application, SPM Instrument AB | | | 10:00 am - 10:45 am | 1S7b: (90 min.) Rolling element bearings - Why the harmonics, why the side bands
Clyde Volpe, Owner, Vibration Institute of Australia | 2S8: Acoustic vibration monitoring
Tom Murphy, Corporate Training Manager, SDT Ultrasound Solutions | 3S7: Online Condition Monitoring utilising Acoustic Emission on a very slow speed application
Mark Ciechanowicz, Industrial Services Manager, Schaeffler Australia Pty Ltd | | | 10:45 am - 11:15 am | Refreshment and Snack Break in Exhibition Hall | | 11:15 am - 12:00 pm | 1S8: Motion Amplification - Moving vibration analysis to the visual spectrum
Andrew Gale, Technical Director, Optical Motion Technologies | 2S9: Using Ultrasound for Super Slow Speed Applications
Ian Ware, Managing Director, Ultra-Tek | 3S8: Understanding Machinery Malfunctions for Automated Detection, Trending and Alarming
John Morey, Engineer, Tensor Systems Pty Ltd | | | 12:00 pm - 1:00 pm | Lunch in Exhibition Hall | | 1:00 pm - 1:45 pm | 1S9: Nefarious methods of reducing vibration caused by resonance in large turbo machinery.
Simon Hurricks, Predictive Maintenance Engineer, Genesis Energy Ltd | 2S10: Case Study: Maximising Cost Effectiveness of Machine Condition Monitoring Frequencies
Peter Todd, Reliability Engineer, ARIA | 3S9a: (90 min.) Case Study: Vibration in the real world – examples from the field
John van Bynen, Director, Commotion Systems Pty Ltd | | | 2:00 pm - 2:45 pm | 1S10: VFDs: The vibration analysts's worst nightmare
Scott Dow, Senior Instructor, Mobius Institute | 2S11: Inner Race Bearing Faults
Glenn Withington, Condition Monitoring Technician, Rio Tinto | 3S9b: (90 min.) cont'd. Case Study: Vibration in the real world – examples from the field
John van Bynen, Director, Commotion Systems Pty Ltd | | | 2:45 pm - 3:00 pm | Afternoon Coffee and Tea in Foyer | | 3:00 pm - 3:45 pm | 1S11: Isolators – How on earth does putting springs under a machine reduce vibration?
Jason Tranter, Managing Director, Mobius Institute | 2S12: Implementation of Condition Monitoring in Well Head Compressor Operation
Puji Nugroho, Mechanical Engineer, VICO Indonesia | 3S10: Case Study Challenge: Test your analysis skills in a case study presentation that asks you, the audience, to decide what to do next
Scott Dow, Senior Instructor, Mobius Institute | | | 3:45 pm - 5:00 pm | Interactive Forum / Closing / Giveaways |
| | | | | | 8:00 am - 12:30 pm | Certification Day - CAT I, II, III Certification Exam |
|
