| | | | | | 06:00 - 16:30 | Registration | 07:00 - 08:00 | Morning Coffee and Tea | 08:00 - 09:15 | Welcome and Keynote Address | 08:30 - 09:15 | KN1: Keynote - Challenges for Maintenance in a Changing World Herman Baets, Company Manager - Independant Consultant, MRT | 09:30 - 12:30 | WS1: Practical vibration analysis workshop: Interactive and challenging case studies (Part 1 - Part 2 required below) Scott Dow, Senior Instructor, Mobius Institute | AMWS2: Time signal analysis of ultrasound signals workshop Tom Murphy, Corporate Training Manager, SDT Ultrasound Solutions | AMWS3: Detecting and preventing rolling element bearing faults Jason Tranter, Managing Director, Mobius Institute | | | 12:30 - 13:30 | Lunch | 13:30 - 16:30 | WS1: Practical vibration analysis workshop: Interactive and challenging case studies (Part 2 - Part 1 required above) Scott Dow, Senior Instructor, Mobius Institute | PMWS4: Bearing inspection with ultrasound Peter Boon, European Training Manager, UE Systems Europe | PMWS5: An animated introduction to fluid-film bearing vibration analysis Jason Tranter, Managing Director, Mobius Institute | | | 16:30 - 18:00 | Welcome Reception in Exhibition |
| | | | | | 06:00 - 16:30 | Registration | 07:00 - 08:00 | Morning Coffee and Tea | 08:00 - 09:15 | Welcome and Keynote Address | 08:30 - 09:15 | KN2: Keynote - Successfully Applying Predictive Analytics for Data Driven Maintenance Dr. Joris Van Ostaeyen | 09:15 - 09:45 | Morning Coffee and Tea Break in Exhibition | 9:45 - 10:30 | 1S1: Isolators – How on earth does putting springs under a machine reduce vibration? Jason Tranter, Managing Director, Mobius Institute | 2S1: Case Study Challenge: Test your analysis skills in a case study presentation that asks you, the audience, to decide what to do next Scott Dow, Senior Instructor, Mobius Institute | 3S1: Case Study: Condition Monitoring & RCA: A road map to operational excellence Muhammad Asadullah, Assistant Manager Technical Services, Uch Power Private Limited | 4S1a: The felt roll bearings - how to identify loose inner ring's fit on a roll journal Pavel Jakobson, PdM and Precision SME, ILIM Group | 4S1b: Failure detection on a bearing from an alternator with envelope technique. João Duarte dos Santos, Lieutenant, Engineer, Portuguese Navy | 10:45 - 11:30 | 1S2: Case Study: Added value of permanent vibration monitoring for turbomachinery Sébastien Grégoire, Technology Manager Vibrations & Mechanics, Laborelec | 2S2: Accurate condition monitoring of ultra-low and low speed machines Tim Sundstrom, Manager of Strategic Sales & Application, SPM Instrument AB | 3S2a: Case Study: Bridge to better Condition Based Maintenance Jos Sas, Product Manager, Allied Reliability Group | 3S2b: Case Study:Predictive Maintenance and Vibration CM in a paper plant: SUPREME project Sophie Sieg-Zieba, Project Manager, CETIM | 4S2: Machinery Health Diagnostics: An insight to condition monitoring Daniyal K. Durrani, Reliability Lead, United Energy Pakistan (former British Petroleum) | 11:45 - 12:30 | 1S3a: Motion Amplification: A revolution in vibration and structure monitoring Nicolas Bleret, Business Development Director, I-Care | 1S3b: Case Study: History of dealing high vibration on NOx gas compressor during startup Mohsin Murtaza, Machinery Engineer, Fatima Fertilizer Company Limited | 2S3: High frequency vibration analysis using the PeakVue technology Anders Hultman, Vibration Engineer M.Sc., Askalon | 3S3: High return motor management Mark Gurney, Reliability Engineer | 4S3: Condition monitoring on rotating machines illustrated by an example of azimuth thruster Harald Reiners, Manager Condition Monitoring Services, FAG Industrial Services | 12:30 - 13:30 | Lunch in Exhibition | 13:30 - 14:15 | | 2S4a: A quick introduction to the other condition monitoring technologies Jason Tranter, Managing Director, Mobius Institute | 3S4: The Multi-Technology Approach to CBM Ettore Di Pasquale, Service Division Manager, SPM Instrument Srl | 4S4: How to increase your MTBF through wireless vibration monitoring? Johan Van Puyenbroeck, Business Development Manager, I-care Reliability Group Pieter Van Camp, I-care Reliability | | 14:15 - 14:45 | Afternoon Coffee and Tea Break in Exhibition | 14:45 - 15:30 | 1S5: Recent advances in vibration based bearing condition monitoring Agusmian Ompusunggu, Senior Research Engineer, Flanders Make vzw | 2S4b: cont'd. A quick introduction to the other condition monitoring technologies Jason Tranter, Managing Director, Mobius Institute | 3S5b: Oil Analysis of air compressors leads to 48% energy saving Mark Gurney, Reliability Engineer | 4S5: Quality alignment depends on measurement quality Dragutin Lacko, Technincal Manager, PRUFTECHNIK N.V. | | 15:45 - 16:30 | 1S6: Case Study: Wind turbine gearbox shafting torsional vibration analysis Max Ma, President, MHCC | 2S5: Assessing the fatigue life of components mounted on rotating machinery Frédéric Kihm, Engineering Consultant, HBM Prenscia Dr. Marco Bonato, Reliability Engineer, Valeo | 3S6: Case Study: Predictive analysis to a HDPE extruder gearbox failure – Reverse analysis João Costa, Reliability Engineer, Repsol | 4S6: High definition gearbox monitoring Tim Sundstrom, Manager of Strategic Sales & Application, SPM Instrument AB | | 16:30 - 17:30 | Reception in Exhibition | 18:00 - 20:30 | Evening Dinner & Entertainment |
| | | | | | 06:00 - 15:00 | Registration | 07:00 - 08:00 | Morning Coffee and Tea | 08:00 - 08:45 | KN3: Keynote: Fault Detection, Root Cause Analysis and Documenting your VA Program Dean Whittle, Managing Director, Reliability Maintenance Solutions Ltd | 09:00 - 09:45 | K4: Keynote - Making Vibration Analysis Count Jason Tranter, Managing Director, Mobius Institute | 09:45 - 10:15 | Morning Coffee and Tea Break in Exhibition | 10:15 - 11:00 | 1S7a: Vibration troubleshooting - case studies for different fault types Ninoslav Zuber, Associate Professor, Technical Research Center and Faculty of Technical Sciences in Novi Sad | 2S6: VFDs: The vibration analyst's worst nightmare Scott Dow, Senior Instructor, Mobius Institute | 3S7: Why care about torsional vibrations ? Frits Petit, Expert Engineer Vibrations & Mechanics, Laborelec | 4S7: Bridging the Vibration Gap with Digital Vibration Products Tom LaRocque, Director, Research and Development, Meggitt (Maryland), Inc. | | 11:15 - 12:00 | 1S7b: cont'd. Vibration troubleshooting - case studies for different fault types Ninoslav Zuber, Associate Professor, Technical Research Center and Faculty of Technical Sciences in Novi Sad | 2S7: Acoustic vibration monitoring Tom Murphy, Corporate Training Manager, SDT Ultrasound Solutions | 3S8a: Case Study: Torsional resonance on centrifugal blower Kris Deckers, Technical Director, Allied Reliability Group Emea | 3S8b: How using a different kind of sensor can give a new dimension to your Vibration Analysis Geoff Walker, Operations Director, Artesis LLP | 4S8: Monitoring System - Learn as much as possible, Do what you know Héctor Palacio, Condition Monitoring Systems Specialist, Héctor Palacio | 12:00 - 13:00 | Lunch Exhibition | 13:00 - 13:45 | 1S8: Online condition monitoring on overhead cranes Stijn Droessaert, Support Manager Crane Maintenance , ArcelorMittal | 2S8a: Case Study: Vibration analysis of bearing faults in RCPH-2 pumps Rao Vamsidhar, Assistant General Manager, Visakhapatnam Steel Plant | 2S8b: Case Study: Single shot balancing saves time and power Rao Vamsidhar, Assistant General Manager, Visakhapatnam Steel Plant | 3S9: Rotor balancing and influence coefficient analysis Stanley Bognatz, President, M&B Engineered Solutions, Inc. | 4S9: Case Study: Combining advanced vibration analysis techniques with Finite Element Analysis Geert van Rijswick, Technical Manager, Van Geffen Allround Machine Support B.V. | 14:00 - 14:45 | 1S9a: Test your skills: Interactive diagnostic challenge session Dean Whittle, Managing Director, Reliability Maintenance Solutions Ltd | 2S9a: Offline monitoring several years then successful root cause analysis by phase measurement Jean-Luc Pierrieau, Technical Application Engineer, Schaeffler France | 2S9b: Online monitoring could be usefull to see variable conditions and do root cause analysis Jean-Luc Pierrieau, Technical Application Engineer, Schaeffler France | 3S10: Vibration analysis of alignment problems regarding closed coupled generator sets Marc Böhning, Application & Product Support Engineer, Zeppelin Power Systems GmbH & Co. KG | 4S10: How vibration analysts can take advantages of modern expert systems? Johann Loesl, International Business Development Manager, ACOEM | 14:45 - 15:00 | Afternoon Coffee and Tea in Foyer | 15:00 - 15:45 | 1S9b: cont'd. Test your skills: Interactive diagnostic challenge session Dean Whittle, Managing Director, Reliability Maintenance Solutions Ltd | 2S10: Case Study:An investigation into the source of vibration of a 20 MW Turbo Alternator John Sykes, Training Manager and Technical Authority, AVT Reliability | 3S11: Effect of load change on the vibration spectra and timewave form of planetary gears Ibrahim H Caglayan, General Manager, VibraTek Eng Co Ltd Gungor Aydin, Preventive Maintenance Chief, Denizli Cement | 4S11a: Fault detection under medium and low rotational speed Carina Freitas, Research Engineer, Siemens Industry Software | 4S11b: Case Study: Blade vibration monitoring Rik Geerdink, Senior Expert Vibrations, Advituro | 15:45 - 17:15 | Interactive Forum / Closing / Giveaways |
|