5:00 pm - 7:00 pm | SPE Rotational Molding Division Committee Meeting and Dinner |
1:00 pm - 4:00 pm | REGISTRATION OPEN AND EXHIBIT SETUP |
4:00 pm - 5:00 pm | RECEPTION AND COCKTAILS |
7:30 am - 8:45 am | BREAKFAST IN EXHIBIT AREA |
8:45 am - 9:00 am | Introduction and Announcements Larry Whittemore, Stoner inc. |
9:00 am - 10:00 am | Keynote: The Growth Dynamic in Rotomolding Peter Mooney, PCRS |
10:00 am - 10:30 am | Lead, Follow, or Get Out of the Way: Global Consolidation in the Rotational Molding Sector Jill Li, Blaige & Company's |
10:30 am - 11:00 am | COFFEE BREAK IN EXHIBIT AREA |
11:00 am - 11:30 am | Conversion to Rotational Molding Mike Collins, Tenjam, Inc |
11:30 am - 12:00 pm | Innovation In Tooling Tom Innis, Avantech |
12:00 pm - 1:30 pm | LUNCH IN EXHIBIT AREA AND PRESENTATION Elizabeth Biddle, Penn College |
1:30 pm - 2:00 pm | Keynote |
2:00 pm - 2:30 pm | Hands On |
2:30 pm - 3:00 pm | New Solutions for Changing Needs In Rotomolding |
3:00 pm - 3:30 pm | COFFEE BREAK IN EXHIBIT AREA |
3:30 pm - 4:00 pm | Burner Maintenance for Rotational Molders |
4:00 pm - 4:30 pm | Innovation in Equipment |
4:30 pm - 5:00 pm | A New Commercial Organic Peroxide for Rotomolded Crosslinked Polyethylene |
5:00 pm - 5:30 pm | RECEPTION AND COCKTAILS IN EXHIBIT AREA |
5:30 pm - 7:30 pm | DINNER AND AWARDS IN BALLROOM |
7:30 am - 8:30 am | BREAKFAST IN EXHIBIT AREA |
8:30 am - 9:00 am | Introduction and Announcements Larry Whittemore, Stoner inc. |
9:30 am - 10:00 am | Keynote Michael Poloian, Integrated Design Systems Inc |
10:00 am - 10:30 am | Rotoloc Inserts Glenn Larkin, Chevron Phillips Chemical Company LP |
10:30 am - 11:00 am | COFFEE BREAK IN EXHIBIT AREA |
11:00 am - 11:30 am | Cost Effective Solutions for the Rotomolding Process George Gerasym, Orenda Automation |
11:30 am - 12:00 pm | Feasibility Study of 3D Printed Inserts for Rotational Molding Logan Tate, Penn College Anthony Wagner, Penn College |
12:00 pm - 1:30 pm | LUNCH IN EXHIBIT AREA AND PRESENTATION: IDSA Report Tom Innis, Avantech Steve Zamprelli |
2:00 pm | EXHIBITS CLOSED AND BREAK DOWN |
1:30 pm - 2:00 pm | Keynote |
2:00 pm - 2:30 pm | The Challenges of Rotomolding Dumpsters |
2:30 pm - 3:00 pm | Polymer Composites Produced by Rotational Molding: A Focus on Natural Fibers |
3:00 pm - 3:30 pm | COFFEE EXHIBIT AREA |
3:30 pm - 4:00 pm | Value of Metrics and Communication in Molding Operations |
4:00 pm - 4:30 pm | Cleaning Molds, Addressing Whiteness |
4:30 pm - 5:00 pm | FINAL ANNOUNCEMENTS AND ADJOURN (RAFFLE) |
9:00 am - 12:00 pm | Plant Tour: Reduction Engineering |
12:00 pm | Plant Tour: Rotoline USA |