Company: 3X Engineering Stand: Foyer 29 Distinctive Features: STOPKIT is the only efficient repair system applicable under pressure. |
Company: A.M.S. Tugs & Barges Stand: B1 Distinctive Features: A.M.S. GLADSTONE is one of the highest spec barges that A.M.S. has built. She is the first barge from A.M.S. that has a Deck Load Capability of 25T/m2, and classed by ABS. The barge includes a 4 point mooring system, and removable hinge-type ramp door. She also has a full weld construction and internally coated tank. |
Company: Acutec Systems Stand: Foyer 3 Distinctive Features: ACUTEC Gateway facilitates simple internet bearer switching via web browser, bandwidth management, web filtering, bonding of multiple internet services for greater bandwidth, automatic failover, detailed usage monitoring by user and group, Quality of Service and prioritisation of Video and other real-time applications, remote support via VSAT, Fleet broadband and/or 3G. The Acutec Gateway is a one stop Internet Management tool. |
Company: Advanced Sensors Stand: P35 Distinctive Features: Total solids, oil and gas measurement. Particle, droplet and bubble size distribution. DV10. DV50 and DV90 data Process image for offline evaluation. Automatic configuration to simply operation. |
Company: AEC Systems Stand: A40 Distinctive Features: Advanced software for clash detection and Digital Prototyping of plant equipment and skids |
Company: AESSEAL Australia Stand: Foyer 7 Distinctive Features: Hydrostatic Hydrodynamic Dry Running Compressor Seal |
Company: Allalloy Dynaweld Pty Ltd Stand: i7 Distinctive Features: Oerlikon Fluxocord 31HD is a high deposition SAW wire for productivity improvement without any investment on new equipment and the only change is just the wire.The wire is seamless low hydrogen basic type and unlike folded wire there is no re-absorption of hydrogen or moisture from the atmosphere.It can be use in single wire,twin,tandem and multi-wire configuration. |
Company: AMC Search Stand: W6 Distinctive Features: The course will highlight key guidelines and documentation affecting the management and operation of DP vessels to ensure safe and efficient support and management of DP vessel operations. It is tailored to suit management staff of offshore construction contractors, DP vessel owners/operators, manning agents, oil field operators or other companies operating or utilising the services of DP equipped vessels. |
Company: AMMA Stand: W8 Distinctive Features: The AMMA miningoilandgasjobs.com site is the world’s only job boards with a combined Career and Industry Guide for the global resources community. The site is industry owned and industry operated. |
Company: Anguil Environmental Systems Stand: S1 Distinctive Features: The RTO destroys Hazardous Air Pollutants (HAPs) and Volatile Organic Compounds (VOCs) from Amine Stripper Off-Gases, LNG Processes, Glycol Regenerators and Remediation projects. The Anguil RTO requires little to no auxiliary fuel for emission destruction and are built with special materials of construction and design considerations to withstand the corrosive gas streams found at oil and gas facilities. |
Company: ANL - BSL Offshore Containers Stand: V4 Distinctive Features: 20' Full Side Removable Access Doors for easy loading of oversize cargoes and machineryes |
Company: APTS (Australian Pressure Testing Services) Stand: Q14 Distinctive Features: Some of the many advantages of Test Pup are: - Valve is fitted only once, minimizing wasted labour and craneage - Potential damage to valve mechanism and flanges during construction is eliminated - Eliminates fabrication of “Full Spec” temporary spools that require welding, NDT - Minimises potential environmental impact from discarded temporary spools - Test Pup is compatible with all common construction materials |
Company: Aquip Systems Stand: M31 Distinctive Features: -ATEX Zone 2 certified (world-first), IP65 -Traceable wet calibration certificate with every transducer pair -No temperature or zero drift -Any liquid / pressurised gas, any flow rate, any pipe size. -Rugged carbon fibre, stainless steel design |
Company: Asphar Survey Stand: Q39 Distinctive Features: 3 Dimensional Printing. Turn your designs or existing features into reality as scaled down versions, perfect for presentations, planning and design. Comes with a Rapid Design Visualisation model, a program which can be manipulated while flying around the data area with complete measurement functions. |
Company: Atlas Copco Rental Stand: i2 Distinctive Features: This packaged 20ft containerised Steam Boiler is a self contained unit capable of delivering 2000 kg/hr, from & at 100°C. Built primarily for well testing applications, it is supplied complete with combustion and control equipment, all necessary valves and all fittings required for operation. |
Company: Aussie Fluid Power Stand: Z47 Distinctive Features: Completely water based using no oil of any type, completely toxic free and fire safe, completely safe for any operating environment, environmentally friendly, lowered insurance premium due to use of water, applicable where standard hydraulics isn't such as underwater, at least same efficiency as standard hydraulics, can replace less efficient pneumatic and electric applications, cheaper operating and maintenance costs |
Company: Australasian Corporate Solutions Stand: V17 Distinctive Features: We deliver a professional service, tailored to the requirements of your company, in Tax Planning, Corporate Structures and Migration Law. With our network partners in payroll, legal, banking, operational management, relocation services, insurances, we can guide and direct all aspects of your operations in the region. |
Company: Australian Marine Services Stand: Plaza 2 Distinctive Features: |
Company: Australian Safety Engineers Stand: L36 Distinctive Features: Haskel’s Compact IRCD (Injection Rate Control Device) is a unique system for the multipoint chemiical injection into oil and gas production systems. Ceramic and PEEK™ metering and regulating parts overcome many of the problems usually associated with flow control valves, such as chemical adhesion, providing even longer life and fewer blockages, all combined in one compact valve design. |
Company: Barge Master Stand: S26 Distinctive Features: Barge Master is a product with many applications. Essentially all marine lifting operations up to 1000 Ton can be performed safer and quicker when using a Barge Master. Barge Masters can be utilized as: Motion compensation platforms for cargo during vessel to platform transfers. Motion compensation platforms for standard crawler cranes on flat top barges. |
Company: BIS Industrier Stand: M27 Distinctive Features: Unlike conventional cryogenic insulation solutions, our solution has been designed to allow easy maintenance on equipment that need adjustment or renovation. The solution can be removed and re-installed several times, which means significant cost savings. Lambda Cryo Box has been extensively tested at SINTEF Energi, where the insulation solution was subjected to cooling down to –163°C / –261°F. |
Company: BLH Safety Solutions Stand: Plaza 4 Distinctive Features: BLH Stop Drop Safety Barricading is an advanced plastic polymer barricading system. Easy to erect and dismantle, temporary or permanent, weather-proof and light weight. It has a low wind-rating, is fire and chemical resistant, non-conductive, recyclable, non-obscuring, glare resistant and impact resistant. Tested by external organisations, it meets or exceeds Australian and International standards. |
Company: Boltstress Services Stand: Y5 Distinctive Features: Intrinsitag - RFID flange joint management system. Complete with 4 level calculation software, 7 trillion joint database, electronic JSA's all linked to pipeline management, completions and planning software |
Company: Bosbox Stand: U1 Distinctive Features: We've expanded our range of wall mounted distribution modules into a new tough 63A poly model.These heavy duty powerhouses are available in the standard configuration or customisable to your requirements. If you need a Bosbox with special plugs, sockets, switches we’ll build you one.Rely on the proven quality of a 100% Australian Owned ISO Company, rely on Bosbox. Visit www.bosbox.com |
Company: BPP - TECH Stand: B21 Distinctive Features: BPP-Cables reduces risks and costs through its expertise in advanced cable technology and the careful management of the entire procurement and life cycle, including design, manufacturing, handling, installation and operation. BPP-Cables reduces the total cost of ownership with surveillance of the critical operations: design, manufacture and installation. Applications; subsea, downhole, in-pipe or custom design. |
Company: Bupa Stand: U30 Distinctive Features: Bupa offers International Private Medical Insurance to you or your employees working and living overseas. Bupa’s cover provides prompt access to planned and emergency medical care anywhere in the world. Visit us at stand no. U30 to find out more about our special corporate rates and benefits. |
Company: Cal Dive International Stand: B7 Distinctive Features: Seaeye Panther XT Plus (Light Workclass ROV) |
Company: Callidus Process Solutions Stand: Z27 Distinctive Features: A simple, colour-coded, traffic light system display makes it easy to use and understand. Identifies potential through-valve leakage, eliminates need to remove valves with acceptable leakage from service. Reduces downtime, increases operating efficiency and ensures significant cost savings. Valves exhibiting leak characteristics can be referred to Callidus for further investigation, using the Callidus Leakage Volume Analyser. |
Company: Carlson Wagonlit Travel Stand: Foyer 8 Distinctive Features: CWT’s Australian Business Traveller Insights: Mobile Technology 2011 report looks into the effect that connecting and supporting employees on the road has on the traveller and provides tips on how to help companies increase productivity, retain the best talent and enhancing the safety and security of their staff and the overall travel experience. |
Company: Chemalert Stand: Foyer 1 Distinctive Features: ChemAlert for iPhone and iPad now brings the trusted name of ChemAlert to the world of mobiles. Key chemical safety management information including Hazards and GHS Classifications, Risk and Safety Phrases, First Aid information and recommended Personal Protective Equipment (PPE) is now available at your fingertips... |
Company: ClampOn Stand: L20 Distinctive Features: The ClampOn DSP Subsea Corrosion-Erosion Monitor (CEM) continually monitors and quantifies changes in wall thickness over a large area of a pipeline. The instrument estimates the rate at which corrosion and/or erosion reduces the thickness of the pipe wall. In this way, it can provide operators with an early warning of potentially catastrophic failures before they occur. |
Company: Competency Training Stand: W4 Distinctive Features: In an industry competing for skilled, competent workers, owners and operators can rely on our Competency Assurance service to achieve operational success. Our service involves Nationally Recognised Training solutions underpinned by consultants experienced in the hydrocarbons industry; multidiscipline engineering; and project delivery. Discover more about our Competency Assurance Management System (CAMS) which involves all aspects of workforce training and development. |
Company: Constructive Media Stand: C45 Distinctive Features: High level of realism; Effective in communicating installation and operational procedures; Cost-effective way to communicate large or small-scale concepts. |
Company: Cooper Industries Australia Stand: X18 Distinctive Features: Explosion-proof lighting concept for extreme conditions: The light fitting series eLLS 08 combines the latest lighting technology with a robust construction. Due to their high robustness and resistance to aggressive chemical environments by seawaterresistant stainless steel, these luminaires are ideal for all hazardous areas such as on-shore and offshore facilities, chemical plants, refineries and pharmaceutical industries etc. |
Company: CSC Stand: O36 Distinctive Features: Improve efficiency and capability to recover increasing volumes of oil and gas • Anticipate and manage the big “crew change” (current workforce fast approaching retirement age, increasing competition for “new talent” • Institutionalize knowledge and experience • Operate in an environmentally-responsible manner with due regard to health and safety |
Company: CTC Marine Projects Stand: L34 Distinctive Features: The RT-1 Rock Trencher is the world’s largest tracked underwater trencher. With 2.35MW of effective trenching power it is designed specifically for the burial, stabilisation and protection of large diameter pipelines/ trunklines in hard soil regions. This methodology delivers improved economic and environmental benefits in comparison to other protection methodologies. |
Company: Damper Technology Ltd Stand: P2 Distinctive Features: The Radial Vane Damper (IVC) is predominantly used on fan inlet applications, offering an enhanced level of flow and pressure control. A Radial Vane Damper has multiple blades arranged around a central hub enhancing the performance of the fan by introducing swirl into the fan inlet providing an efficient method of control. |
Company: Dassault Systèmes Australia Pty Ltd Stand: Foyer 29 Distinctive Features: In Version 6 Release 2012x SIMULIA is being developed to provide robust and advanced finite element analysis and multiphysics capabilities. You are able to rapidly explore real-world performance of your design, make immediate design improvements, and share your simulation results to accelerate making performance-based decisions. |
Company: Desanders International Stand: E2 Distinctive Features: www.desanders.com Desanders International’s equipment is temporarily installed upstream of customers’ surface equipment providing an engineered solution to the hazards associated with sand entrained in high pressure produced gas and liquid streams since 2001. Erosional damage to piping, valves, chokes and separators is eliminated. Contact(s): Chris Hemstock, Rick Wasfy |
Company: Dialight ILS Australia Stand: Y28 Distinctive Features: The first of its kind, the Dialight SafeSite TM Transportable LED Hibay/Floodlight luminaire for a wide variety of Hazardous Area applications, both indoor and outdoor. It is ideally suited for oil & gas, chemical, petro-chemical and other potentially explosive environments. With typical applications such as tank cleaning and sandblasting. |
Company: Draeger Safety Pacific Pty Ltd Stand: T18 Distinctive Features: The Dräger X-act 5000 introduces a new era of gas measurement: Only one device is necessary for measuring and sampling. The automatic tube pump is compatible with Dräger short-term tubes as well as sampling tubes and systems. The robust housing supports the use of the pump to perform the daily measuring tasks under tough conditions. |
Company: Dril-Quip Stand: Y29 Distinctive Features: The LS-15 Liner Hanger System brings a new approach to liner hanger packers, integrating Dril-Quip's field-proven subsea technology into its design. This system is ideally suited for long reach, high angle, horizontal and ultra heavy liner completions. It incorporates many innovative tool designs to ensure reliable operation and service in today's most demanding wells. |
Company: Drilchem Global Stand: H6 Distinctive Features: A "single--sack" broad spectrum blend of sized and shaped materials designed for remote locatons, to be effectve in curing severe to total losses (>60 bph) in highly porous formatons, with lower concentratons than industry standard formulatons. Also provides near wellbore strengthening capabilites in unconsolidated formatons. |
Company: Dynapumps Stand: Foyer 9 Distinctive Features: Tacmina Smoothflow® pumps are pulse-less diaphragm type pumps with very high accuracy and unlike regular diaphragm pumps, produce very little vibration or pulsation which is known to create surging, noise and other problems. This unique product solves the issues you would encounter with conventional diaphragm pumps, shaft seals issues & eliminate maintenance required for troublesome pulsation dampeners. |
Company: Eilbeck Cranes Stand: Foyer 17 Distinctive Features: LNG Tank Pump Handling Application |
Company: EJ Electrical Stand: U2 Distinctive Features: The DCU410 is the bas ebuilding block to build a supervision system for both variable speed (propulsion or pumps) or fixed speed (generating set) diesel engines. |
Company: Elliotts Stand: U19 Distinctive Features: Tecasafe is the latest in FR clothing protection. The Tecasafe material offers a higher FR protection to workers in a more comfortable form than previous FR garnets such as Proban and Banwear. |
Company: Emerson Stand: M14 Distinctive Features: APPLETON : POWERPLEX SWITCHBOARDS ALLOW YOU TO RETROFIT AS WELL AS INSTALL NEW ELECTRICAL PANELBOARDS IN HAZARDOUS AREAS OFFSHORE AND ONSHORE. THE POWERPLEX SYSTEM HAS A UNIQUE PRODUCT PROTECTION TECHNIQUE WHICH ALLOWS THE USE OF STANDARD CIRCUIT BREAKERS AND STARTERS AS WELL AS RELAYS IN ZONE 1 AND 2 HAZARDOUS AREAS. |
Company: Encore Automation Stand: T13 Distinctive Features: Otis Instruments OI-6900 is a wireless, long range, self contained, gas detector that is battery powered in the field for up to 12 months, is industry certified and suitable for many applications. Using electro-chemical or Infrared sensors to monitor a large range of gases, it transmits data by radio signal to variety of monitors with many options. |
Company: EnergyNewsBulletin.net Stand: Foyer 20 Distinctive Features: Resource industry media group Aspermont Limited has introduced a bi-monthly specialist magazine, PNG Report. With a focus on the energy and resource sectors in the Papua New Guinea region, the magazine provides comprehensive news and analysis of national and international projects, companies, technology issues and trends. To subscribe, visit www.indudstry-news.net |
Company: Energy Publications Stand: S4 Distinctive Features: March 2012 sees the launch of a new magaz=ine for South East Asia. Oil & Gas Asia. For a brochure and more information contact Mike Twiss at Energy Publications. 0437 700 093 OR EMAIL mike@energy-pubs.com.au |
Company: Ezy-Fit Marine Pty Ltd Stand: D1 Distinctive Features: 330mm bore x 4200mm stroke Super Duplex Stainless Steel hydraulic cylinder for the Gorgon Pipeline laying project. Hydraulic medium is seawater, a world first. |
Company: Fabreeka GB Stand: Foyer 13 Distinctive Features: Fabreeka pad has a damping rate twice the value of natural rubber and unreinforced elastomers. Its high energy storage per unit volume makes it ideal for shock isolation. Fabreeka has a natural frequency as low as 12Hz and is Impervious to most oils and solvents. |
Company: FEAM Stand: W22 Distinctive Features: It is an ATEX certified enclosure type EJB but in execution Ex db IIC T6 - T3 rather than the standard EJB in IIB+H2. The brand is worldwide TM. |
Company: Ferguson Group Stand: K26 Distinctive Features: Extensive range of sizes available all designed and manufactured to the DNV 2.7-1 / EN 12079 standards for safe and secure transportation of cargo. |
Company: FMC Technologies Stand: E14 Distinctive Features: Innovative product: Flow module -– Novolastic • Flow Module: provides easy retrieval and deployment on a down line with ROV assistance (located in the Innovation Zone) - refer to email sent to Paul on Exhibitor publicity |
Company: Framo Engineering Asia Pacific Sdn Bhd Stand: L30 Distinctive Features: The Framo Multiphase Compressor technology features a very robust and compact compressor that provides a simplified subsea wet gas boosting system. The fundamental mechanically robust design of the compressor, with contra- rotating impellers, enables the system designers to eliminate complicated upstream processing equipment, utilized standard and well proven control and low frequency electrical power supply systems. |
Company: Franks Oilfield Services Australia Stand: E8 Distinctive Features: Frank's patented proprietary technology is the only true non marking System on the market today. Provides a Tubing Tong that makes-up tubular connections with absolutely no damage to the tube body. Completely eliminates stress concentrations in the tube body. Unique Gripping Approach with no slippage problems. |
Company: Gardline Marine Sciences Stand: A6 Distinctive Features: Management of the potential impacts of dredging needs to be carried out with a thorough understanding of the variability of the background conditions. With this in mind, Gardline has developed and proven a real time environmental dredge monitoring system for the physico-chemical environment. Each multiple instrument array can record temperature, oxygen, salinity, pH, PAR and suspended solids concentration. |
Company: Gates Engineering & Services Stand: N26 Distinctive Features: |
Company: Geocean Stand: Foyer 29 Distinctive Features: Our new built Shallow water Pipelay Work Barge KALINDA is designed to work from 1.5m up to 65m water depth depending on the pipeline specs. Our 45t tensioner allows us to lay pipelines from 4" to 42". Barge is supplied with 2 shallow AHT working in 1m WD for Anchor handling and crane 220tons. |
Company: Geo Oceans Stand: E5 Distinctive Features: GO Visions systems comprise of new underwater camera technology, spatial positioning and specialised software allowing users to collect and process high quality data in real time, significantly reducing the need for post-field data processing. GO Visions allows for qualitative and quantitative data analysis from one easy to use system designed for transport on aircraft and deployment from small vessels. |
Company: GL Noble Denton Stand: K32 Distinctive Features: GL Noble Denton has commissioned the Economist Intelligence Unit to research and publish the oil and gas barometer for 2012. For a second consecutive year, gathering the opinions of 100’s of professionals to provide a complete view of the challenges that the sector expects to face in 2012 and beyond. |
Company: Green Monster Offshore Stand: C18 Distinctive Features: Green Monster Offshore has developed and introduced into its rental fleet a range of offshore lift-able diesel tanks. Tanks are designed and approved to AS1940/AS1692 and their double skin construction provides 110% secondary containment (self bunded). A DNV 2.7-3 compliant lift frames complete with slings, fork pockets and sacrificial sea fastening plates completes the package. |
Company: Grimwood Heating Stand: Y6 Distinctive Features: |
Company: Hagstrom Drilling Stand: H38 Distinctive Features: A Ravestein Container Pontoon (RCP-250) Jack-up barge ideally suited for near shore project requirements including construction, drilling and cone penetration services. |
Company: Hi Force Stand: O26 Distinctive Features: The SJS10-M hydraulic spreader is compact, low weight, spring assisted piston retract design with a powerful 13 tonnes of spreading capacity and comes complete with an inbuilt manually operated hand pump. Manufactured from high strength steel, with a total spreading distance of 60mm in 5 operations, using the step blocks provided with the tool. |
Company: Hilti (Aust.) Pty Ltd Stand: Foyer 19 Distinctive Features: Hilti's proven MI Industrial pipe support system offers high strength and maximum installation flexibility. This modular support system optimizes installation time and offers a high level of operator safety. Hilti. Outperform. Outlast. |
Company: Hobre Instruments BV Stand: S29 Distinctive Features: The unique Hilase Process Analyser measures H2S, H2O, CO2, Ammonia, etc in a range from low ppm to high % levels. Full separation of photo acoustic measuring cell and electronics, heated cell option, multi-stream analysis, fast response time, stable calibration, more than 90% self diagnostics, robust design, a 6 months maintenance interval, ATEX zone 1 certification and >99,8% availability. |
Company: Honeywell Stand: S8 Distinctive Features: Honeywell’s remote operations, collaboration and optimization solution is a modular and comprehensive solution that allows industrial organizations to monitor and manage operational activities across multiple facilities from anywhere within a network of sites. The solution helps organizations better leverage their expertise between locations, mitigate staffing issues associated with remote locations, as well as maximize production and optimize operations |
Company: HYDAC International Stand: U20 Distinctive Features: Solenoid or manually operated. Pneumatic or hydraulic operated. Ball-seated type. Manual emergency operation. Electrical position control. |
Company: Hydratight Stand: C6 Distinctive Features: Morgrip is a range of mechanical pipe connectors which provide high integrity connections for all types of metal pipe work, on shore, off shore and subsea. |
Company: I & M Winch Hire Stand: D8 Distinctive Features: The newest winch to our hire fleet boasts a maximum line pull of up to 55 tonnes on the 1st layer. Supplied with a remote or locally mounted control valve and wire guard for operator safety, this winch is fully tested and NATA Certified prior to leaving our workshop to ensure safety and reliability for every hire contract. |
Company: Inflatable Packers International Stand: E6 Distinctive Features: IPI’s “ST Range” is a fundamental redesign of its “CBM DST” product, also used for CO2 Sequestration and other geotechnical projects. Run with IPI’s highly durable open hole inflatable packers at pressures up to 5,000 psi, it is capable of both DST and injection testing with a zero displacement valve and low frictional loss characteristics. Coiled tubing compatible. |
Company: Insulect Australia Stand: Z65 Distinctive Features: Durolight PIP is an innovative new solution for cold pipe insulation cladding. Developed by Röchling, PIP is an uncured, flexible polyester glass film that is easily cut and shaped to pipe work, and cures hard in less than sixty minutes with exposure to UV. PIP offers numerous benefits including low cost installation, high mechanical strength, corrosion resistance and UV resistance. |
Company: International Protective Coatings Stand: A1 Distinctive Features: Chartek® 7 is an epoxy intumescent fire protection system certified for jet fire resistance up to 2hours suitable for offshore oil and gas facilities, onshore refineries and chemical processing plants. With excellent weatherability and corrosion prevention properties, it is certified to Norsok M-501 System5A and ANSI/UL1709. Chartek® brand has more than 20 year’s track record in protection of offshore assets. |
Company: ITC Global Stand: K3 Distinctive Features: Low cost, dedicated bandwidth satellite modem options. Integrated Network management of remote sites. Provides flexibility in bandwidth allocations for remote sites. Provide IP multicast facility |
Company: Jacks Winches Stand: L14 Distinctive Features: Latest CE spec air winches 5t>10t rated Ex II2GDcIIB200CX with optional pilot air pendant controls |
Company: Kenz Figee Stand: S25 Distinctive Features: With our Remote Access Service (RAS) Kenz-Figee offers quality and service for state-of-the-art equipment and a high reliability guarantee of equipment during operations. RAS is a flexible solution for remote maintenance applications. Our technical specialists are able to perform remote in-depth analyses and provide advanced technical support immediately, offering major time and cost benefits for our clients. |
Company: Klinger Stand: Q2 Distinctive Features: Safety Spray Shields are designed to prevent a catastrophe by temporarily containing hazardous leaks and sprays. Leaks can occur on piping systems conveying chemicals, high temperature fluids, and steam, which can harm workers, nearby equipment, and the environment. Leaks of flammables, such as fuel or oil, can create fire and explosion hazards. |
Company: Koso Kent Introl Limited Stand: P26 Distinctive Features: With non-retrievable or insert retrievable designs, it can handle multi-phase production, water/chemical/gas injection & artificial gas lift, where conditions subjects to HPHT, JT effect, water depth, temperature & shut-in pressure. |
Company: KROHNE Stand: Y19 Distinctive Features: The ALTOSONIC V12, for gas custody transfer, combines for the first time the advantages of the parallel chord concept and the reflection technique. Raising the bar in terms accuracy, it is equipped with five measuring planes with reflecting chords. Measuring errors are thus kept to an absolute minimum. |
Company: Lankhorst Mouldings Stand: T31 Distinctive Features: Deepwater drilling and production risers are susceptible to vortex-induced vibration which can contribute to fatigue damage and compromise the service life of the system. Lankhorst have developed a 3-shell® VIV Suppression System to meet the demanding requirements of both Operators and Installation Contractors for effective, low cost and safe to install strakes. |
Company: Leeden Australia Pty Ltd Stand: K2 Distinctive Features: Mirage MM1000i is an internally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation and counter boring. Its features include: induction hardened and ground ‘V’ slides, powered swivel tool post, 3 continuous groove feed gearbox, low noise level 2.0hp drive and quick set adjustable clamping jaws. |
Company: Legrand Stand: Foyer 22 Distinctive Features: - IK10 impact resistant - IP55 weatherproof - Maximum pull-off resistance - ZAMAK alloy: resistant to corrosion, scratches, lighter flames and salt. - Flush or surface mounted installation |
Company: LR Scandpower Stand: U5 Distinctive Features: Computational Fluid Dynamics has the purpose to get deeper insight for a safer world. The largest potential for risk reduction is seen from reducing the consequences of accidental events. Detailed probabilistic consequence modeling gives safer designs.Is used for Explosion, Helicopter landing regularity, Vent Exposure, Ventilation and Wind Chill analyses. |
Company: Marais Lucas Technologies Pty Ltd Stand: Foyer 29 Distinctive Features: Performance of microtrenches for the deployment of optic and electric networks in urban and motorway environments (Up to 600 lm/day). Excavated material loaded by suction, preservation of the road construction, vehicle traffic not interrupted during the works, limited disturbance to residents, reduction in building costs, increased safety of the work site |
Company: maxon motor Australia Stand: A13 Distinctive Features: The ESCON 36/2 DC is the first product in the new servo motor controller range by maxon motor and shows how user-friendly motor drive technology can be. The extremely compact, powerful 4-quadrant PWM servo controller offers efficient control of brushed permanent-magnet activated DC motors up to approx. 72 W. |
Company: MCM Foods Stand: Stairs Distinctive Features: Remote meals for the resource industry, cyclone and emergency effected areas also providing whole range of Catering services and solutions |
Company: Mermaid Marine Australia Stand: X8 Distinctive Features: The Mermaid Leveque is a 75m DP II Platform Supply Vessel purpose built to support offshore drilling and construction phases of the oil and gas development. The Leveque is ideally suited to transport cargo to offshore rigs and platforms and a variety of other tasks. The Leveque’s diesel electric design delivers a high level of reliability and fuel efficiency |
Company: Metocean Services International Stand: Q34 Distinctive Features: The MetOcean iSPHERE Oil Spill Tracking buoy provides a cost effective method of tracking oil spills. The buoy is Iridium based and simple to use and has been used extensively around the world. |
Company: MMI Engineering Ltd Stand: P10 Distinctive Features: Intellifire® created by PK Technology in conjunction with MMI Engineering, is the world’s first Asset Integrity Management system designed for PFP. Using data entry on the iPAD® and automated survey picture uploading, risk based inspections are performed and managed in real time. The asset owner can view dynamic reporting, current plant condition, prioritization, repair budgets and forecasting. |
Company: MSCM Stand: P34 Distinctive Features: The conventional Free Flying stabplate is fitted with a series of hydraulic couplings that are manifolded in pairs that can be used to reconfigure the subsea distribution system remotely by a work class ROV . |
Company: Nautronix Stand: B15 Distinctive Features: NASNet® FPR offers an acoustic based monitoring system for use on FPSO installations where the integrity and position of the associated FPSO assets need to be maintained. NASNet® FPR provides acoustic position updates for DP control, feedback on system parameters and warning of any potential issues, allowing important operational decisions to be made based on the best available information. |
Company: NHP Electrical Engineering Stand: H14 Distinctive Features: |
Company: NKT Flexibles Stand: D2 Distinctive Features: In order to meet the increased focus on continuous monitoring of installations, NKT Flexibles offers integrity monitoring systems with flexible riser deliveries. The systems provide valuable information for integrity management and condition-dependent maintenance. The monitoring systems are monitoring strain and temperature and can be used for detection of outer sheath breach and accumulated fatigue damage in flexible risers. |
Company: Novaris Stand: Q32 Distinctive Features: Novaris New SDD Surge Diverters come with all the high standards that you have been use to as with all Novaris products the range of New SDD Surge Diverters are now 18 mm slimmer just 56mm for a 3 phase 50kA all mode surge diverter and just 18mm for a single phase all mode Surge Diverter. |
Company: Offshore Unlimited Stand: Q26 Distinctive Features: Offshore Unlimited's new 35m Catamaran joins the fleet in early March 2012, Outer Limit has accommodation for up to 32 personnel, transit speed of 21 knots, deadweight of 125 tonnes, Kongsberg Dynamic Positioniong, 4 Point mooring, Large charterers work stations, |
Company: Oil & Gas Gazette Stand: Foyer 11 Distinctive Features: Australia's first oil & gas magazine to launch an iPad version of the magazine |
Company: OMB Offshore Applications Ltd Stand: B17 Distinctive Features: Reliable equipment solutions are needed to decrease costs and reduce downtime. A significant amount of time and resources are regularly spent on the replacement and maintenance of Riser valves. The OMB Riser ValveTM is a standard setter in its field, with a new approach to inline maintainability and life extension. It reduces the risk of failure while increasing production uptime. |
Company: On Site Safety Stand: U17 Distinctive Features: Class 1, Division 1 Class 2, Division 2 Class 3 Intrinsic Safe 1 Watt hand held LED torch which is also helmet mountable. UL certified. |
Company: Onsite Treatment Technologies Stand: M27 Distinctive Features: Hydraulic operated submersible pumps |
Company: Optimum Control Stand: Q6 Distinctive Features: FlexStream offers excellent control of clean liquids and gas in a compact ball valve design. Up to 36 stages of let down will handle the highest pressure drop wihout damaging noise and cavitation. FlexStream also offers higher Cv range allowing smaller more cost effective valves to be utilised |
Company: P & O Maritime Stand: K36 Distinctive Features: FSV Polaris has been engaged on long term charter by P&O Maritime to support the development drilling program of a major operator in Australia. The Polaris includes but is not limited to the provision of the following: Fast transportation of containerised and packaged cargo and supplies Emergency response Oil spill containment boom deployment Personnel transport and transfer Fire fighting capability |
Company: Pacific Automation Stand: M14 Distinctive Features: Now available at PacificEX, the new Hadar HDL106E LED emergency floodlights. These lights are designed specifically for Zone 1 & 2 Hazardous Areas and offer the following features: • ATEX & IEC Ex Certified • Back-up battery with ability to pre-set • Fit and forget • Arrays of single, double or triple • Energy Efficient • Instant start-up • Vibration resistant • Light weight (only 9kg) |
Company: Parkburn Precision Handling Systems Stand: Q9 Distinctive Features: Oil & gas exploration and production in ever deeper water requires a cost effective means of deploying heavy deepwater structures and tools to the ocean floor. Parkburn satisfies this market requirement by designing and manufacturing state of the art, compact, electrically driven winch systems, utilising neutrally buoyant fibre rope technology. |
Company: Pelican Products Stand: U6 Distinctive Features: The new 2710 features a high intensity LED main light with an optical 4x magnification allowing for a wide or penetrating beam. Additional features include: Low level red, green, or white light for preserving night vision, water resistant and a signaling red (S.O.S), and white beacon light. |
Company: Performance On Hand Pty Ltd Stand: U25 Distinctive Features: The worlds coolest welding glove. Designed for precise multi-task welding and fabrication. Aerogel insulation on back of hand and fingers delivers unmatched insulation and dexterity. Tri layer palm provides enhanced thermodynamic insulation and superior cut protection. Split middle finger articulation for improved dexterity and confident hand tool control. Perspiration resistant leather palm, gauntlet and dorsal. |
Company: Pivot Maritime International Stand: R25 Distinctive Features: FlexiCon is the new generation maritime simulator for the future. Its clever design has the flexibility to morph into different types of simulators at the click of a button; from a ship’s bridge to a tug to an offshore supply vessel with views down onto the deck. It also has a bridgewing complete with its own dedicated controls and instruments. |
Company: ProExpa Stand: Foyer 29 Distinctive Features: Since July 2011, our Group created Pro EXPA Singapore to use as a platform for our regional base to expand our activities in Asia especially in ASEAN and APAC region. |
Company: PT Hydraulics Australia Stand: O31 Distinctive Features: The Power Team Synchronous Lift System uses feedback from multiple sensors to control the lifting lowering & positioning of any large, heavy or complex structure, regardless of weight distribution. An easy to use touch screen display controller uses sensors to monitor from 4 up to 60 lift points simultaneously, accuracy can be adjusted to +/- 2mm differential between load points. |
Company: Quiet Acoustics Stand: V11 Distinctive Features: Lightweight, non-fibrous, metallic honeycomb-cored sandwich panels, micro-perforated on one or both skins to resonate and cancel broad or tonal frequency bands of noise. The structural panels are supplied in infinitely variable thicknesses to suit different tonal or broad frequency bands of absorption. They absorb deeper frequencies and have higher peak absorption than traditional fibrous materials. |
Company: R. STAHL Stand: Foyer 16 Distinctive Features: • Remote HMI / KVM-22“-19“ for hazardous locations zone 1, 2, 21, 22 and industrial locations • Upgrade solution for 19“ VGA and 22“ DVI • Data transmission up 300m via CAT7 • Offers a migration path from Windows XP based to Windows 7 based DCS systems’ |
Company: Radiation Safety Services Stand: Z3 Distinctive Features: The PM1208M performs the following functions: • Continuous monitoring and measuring of the ambient gamma dose and dose rate; • User alert of hazardous situations with an audible alarm; • Recording and storing data for up to 500 events in its non-volatile memory; • Transmitting all recorded data via an infrared channel to a PC for further processing and analysis. |
Company: Radical Torque Solutions Stand: V1 Distinctive Features: The World's first digital and programmable pistol grip torque wrench. Incremental torque setting with an accuracy of +/- 5% of reading. Electronic Torque Shut-off with no clutch for ultimate accuracy and repeatibility. |
Company: Redwing Shoe Company Stand: Foyer 21 Distinctive Features: The Red Wing Boa Boot has a unique lacing system that is a overall must for everyone to see. User friendly and a great safety feature for every worker. |
Company: Reef Subsea - Scanmudring - Rotech Subsea Stand: D1 Distinctive Features: The Scanmachine subsea excavator and tool-carrier systems are based on modified excavators combined with state of the art ROV technologies with open tool interfaces. This combination harnesses the experience of both the advanced subsea technologies and the ruggedness of land based construction machines. |
Company: Resource Super Stand: Foyer 14 Distinctive Features: Specialised Superannuation Plans for the mining, oil and gas and hazardous sectors to assist employers with the challenge of attracting and retaining employees and being an employer of choice. Resource Super is dedicated to constructing superannuation and employee benefit fund solutions for the Australian resources industry. |
Company: Rittal & Phoenix Contact Stand: i20 Distinctive Features: Rittal & Phoenix Contact terminal junction box solution, specifically developed for EXe and EXi hazardous areas. |
Company: Roxtec Australia Stand: Foyer 25 Distinctive Features: The Roxtec BG™ (Bonding & Grounding) product family is a cable entry system for sealing large quantities of steel wire armoured or armoured cables in the least amount of space. Use it in building structures, cabinets and enclosures to save design and installation time – and to reduce costs! |
Company: Royal Purple Oils Australia Stand: E1 Distinctive Features: Synthetic blend hydraulic oil, with Synerlec®. An inherently biodegradeable, ashless, environmentally responsible, high performance, hydraulic oil formulated for those users that need a high performance oil to protect their equipment yet are concerned about the environment. |
Company: Rutter Stand: Foyer 28 Distinctive Features: Rutter’s Sigma S6 Oil Spill Detection system can detect even small quantities of surface oil, outline and estimate the size of the oil slick, and accurately predict the trajectory of the spill across a range of visibility conditions in real-time. |
Company: Sadvik Materials Technology Stand: B2 Distinctive Features: The Trumpf 8kW laser.. thickest cutting capacity & highest speed in the Southern Hemisphere. |
Company: Safehouse Habitats Stand: T30 Distinctive Features: SafeCool - our Ex certified portable air conditioner - benefits workers welfare and increases productivity. Used in conjunction with our insulated habitats we can create cool work environments in the harshest of hazardous environments. |
Company: SafeRad SE Asia Stand: S2 Distinctive Features: SafeRad Radiography system allows radiography work to be carried out without any evacuation of nearby personnel. |
Company: SAL Heavy Lift Stand: Z20 Distinctive Features: |
Company: Scientific & Technical Gases Stand: O34 Distinctive Features: New powder coated gas cylinder (PCGC)provides calibration gas solution for applications requiring smaller gas volumes than normal high pressure cylinders. Capable of using pressure and flow regulators the PCGC is less than 2kg and has a capacity of 112 litres of gas. |
Company: Scope Training Stand: X7 Distinctive Features: New revised Workplace Health & Safety qualifications. Superseding current OHS. Available Soon. |
Company: Scott Safety Stand: U33 Distinctive Features: The distinctive features of the Protégé include: Monitor durability, advanced electrostatic resistance, tri-alarm system, glove tested, one hand operation and heart beat “on” visual confirming monitor is operational. |
Company: Scotwork Negotiating Skills Stand: X1 Distinctive Features: The Scotwork Advanced Negotiating Skills course is unique. It is based on practice and expert coaching rather than lectures, so it quickly builds skills, removes counterproductive negotiating behaviour and delivers a measurable improvement to confidence and performance. |
Company: Seatools B.V. Stand: S30 Distinctive Features: Seatools, a small engineering company in Holland, has engineered and built a state-of-the-art fallpipe ROV for Royal Boskalis Westminster. The device, the latest in its field, consists of a fallpipe ROV with an integrated survey ROV, in order to enable rockdumping and survey procedures to be combined in one single pass, thus reducing the costs of such an operation. |
Company: Seatools Pty Ltd Stand: C43 Distinctive Features: Tritech International Ltd has launched its next generation Gemini 720i multi-beam imaging sonar. Gemini combines the benefits of long range detection with high definition imaging techniques to produce outstanding results. Lightweight, with a compact and robust design, the Gemini can be easily deployed on most ROV and AUV platforms. |
Company: Seatrax (UK) Stand: Q33 Distinctive Features: Seatrax portable cranes are fully API 2C compliant and certified. Its recognised international design, 160ft boom lengths & 100 tonne capacity - makes it the largest, safest and most reliable crane of its kind currently available. |
Company: Seatronics Pte Ltd Stand: B19 Distinctive Features: A new approach to sensors, signals and processing has yielded major improvements in pipe and cable tracking using Sense MARINE PCT. Enhancements provide greater contrast between background noise and target returns, resulting in improved data with reduced pilot workload. ROV pilots have a real-time view of vertical sections through the sea floor showing their positioning relative to the target pipe. |
Company: Severn Glocon Stand: K40 Distinctive Features: Ther Series 8000 range of valves were developed to provide a cost effective , reliable and easily maintained control valve capable of working in low pressure drop environments. |
Company: Specialised Force Stand: i34 Distinctive Features: For over 22 years Tentec have been supplying world class bolt tensioning solutions. Tentec offer both general purpose and specialised ranges of bolt tensioning tools to many varied industries. the range includes both topside and subsea tensioners. |
Company: Spill Station WA Stand: Foyer 18 Distinctive Features: Fully compliant safety shower for areas where mains water is not available. Optional chiller units can pull water from 60degC ambient to compliant 25degC. |
Company: SPX Stand: S17 Distinctive Features: This new pumphead offers users double the flow capacity of a single traditional diaphragm head. Compared to a conventional duplex pump, it saves space and weight because only one gear box is required to drive the equivalent of two pumpheads. They have the ability to provide leak-free operation and prevent the safety and environmental problems associated with dangerous chemicals. |
Company: St John Ambulance Australia (WA) Stand: T16 Distinctive Features: The new St John Ambulance (WA) Certificate IV in Health Care will include high quality training in health care and ambulance operation by the same organisation which operates WA’s only public ambulance service. Plus we include a preloaded iPad for ease of accessing training materials. |
Company: Stork Technical Services Australia Pty Ltd Stand: H8 Distinctive Features: Stork Technical Services introduces our new Close Proximity Radiography System (CPR). The STS CPR system is by far the safest option when conducting radiography around construction sites, operating plant and workshops. It saves our client’s time money, and increases productivity. Conduct Radiography 24 hours per day with minimal interruption to construction programmes, Operating plant and workers. CPR is Safer! |
Company: Superior Energy Services (Australia) Pty Ltd Stand: F34 Distinctive Features: Superior Energy Services’ Wireless Pipe Recovery System (WIPR) was developed to give clients an alternative when retrieving stuck pipe. The WIPR system involves running a dedicated sacrificial sheer sub inside the drilling string. Should the string become stuck, a pre-assembled firing head end cutter is dropped/ pumped down to the sheer sub where it locates in a profile before cutting. |
Company: Swagelok Stand: R14 Distinctive Features: Pressure-reducing regulators, including both spring-loaded and dome-loaded models, are designed for general industrial applications. Back-pressure regulators are available in both spring-loaded and dome-loaded models, and are designed for general industrial purposes. Specialty regulators include products designed specifically for tank blanketing, pharmaceutical applications, and bulk semiconductor gas delivery. |
Company: Swire Oil Field Services Stand: N14 Distinctive Features: All modules are built to DNV 2.7-1 and are rated to the latest FTC codes. All materials used during construction conform to NFPA, USCG and SOLAS. Swire modules are approved by ABS / DNV / Lloyds and meet NORSOK standards. All units can be configured to the needs of the customer. |
Company: Sylvania Lighting Australasia Stand: SLA Juice Bar Distinctive Features: The Trident has a distinctive and unique design that offers unparalleled ingress protection. The built in solar shield effectively prevents UV degradation making it ideal for the harshest environments on the planet. The latest Trident combines state of the art LED technology with the guaranteed 80,000 hours capability of long life T8 lamps. The ‘ultimate’ solution for maintenance free lighting. |
Company: TENSA Equipment Stand: E39 Distinctive Features: Tensa Equipment has released 2 new products to their line of Crane Dynamic Load Reducers (DLRs). The DLR can reduce an offshore cranes dynamic factor to 1.4 or less. This gives the crane 75% more capacity for boat lifts. The DLR10 is rated at 10t SWL and the DLR100 is rated at 100t SWL. |
Company: Thermal Electric Elements Stand: R41 Distinctive Features: IECEx certified explosionproof hazardous area heaters - custom made in Australia |
Company: Thermtech AS Stand: M23 Distinctive Features: The TCC® technology is the patented thermal desorption technology able to treat various oily wastes, drilling waste and slops from wells, bottom tank sludge from refineries, soil recovery from production pits. The TCC® technology can operate both onshore and offshore. The treatment with the TCC® is the best environmental option; it avoids discharge of hazardous substances in the environment. |
Company: Total Industrial and Safety Stand: E7 Distinctive Features: Total Industrial / Extreme Products is proud to be the exclusive representative for the worlds' only 3G Intrinsically Safe Smart Phone, offering unparelleled functionality and safety features not availabile in any other product. Includes: - Mobile data management - GPS Tracking and Man-down - Camera and Video - 3G connectivity - Extremely Rugged design to US MIliary Standards |
Company: Total Marine Technology Stand: B8 Distinctive Features: The Typhoon is a 150hp heavy work-class ROV with a 3000m depth rating. It is designed and built in Australia to be a cost effective and client-focused answer to your ROV needs. The Typhoon has significant advantages in both deck footprint and loading, performance, reliability and a patented seabed positioning system. |
Company: Tracerco Stand: G34 Distinctive Features: Highly reliable, accurate and detailed scan of pipe condition to assess wall erosion, build up, (including hydrates) pitting and insulation degradation, confirming location and extent. |
Company: Transient Control Australia Stand: Y2 Distinctive Features: GM International SRL has released the New Series 5000 IECEx/SIL Approved range of I.S. Barriers to the Australian Market. |
Company: Tronic Stand: E25 Distinctive Features: Backward compatible with the exsisting DigiTRON range. Fully qualified to operate at 4000 metres (13,120 feet) depth pressure (maximum differential if required). Fully qualified for 30 years design life. PD (Partial Discharge) free @ 1.73Uo & 2.50Uo giving long-term integrity. 1000 mate/de-mates (750 dry followed by 250 turbid at 4000 metre depth pressure). Paddle handle with increased versatility. |
Company: TTL Stand: X31 Distinctive Features: Tangent Technologies is the first and only provider in Australia of the BALRUE Acoustic Emission structural monitoring technology. This acoustic emission technology was developed for Lloyds and British Aerospace to monitor various styructures, (including North Sea oil and gas platforms), and provide detailed information to assist with Risked Based Assessment processes. |
Company: Uvex Safety Australia Stand: T19 Distinctive Features: The modern, fashionable design of the uvex pheos safety spectacle makes it ideal for everyday wear in the industrial workplace. Arms offer an advanced ventilation system that works with head movement and is lightweight by design. No metal components, fully recyclable. |
Company: Vahterus Oy Stand: Q38 Distinctive Features: |
Company: Vanguard Composite Engineering Stand: A16 Distinctive Features: Vanguard Hyperbaric Lifeboats are designed and built to SOLAS 86 regulations and adhere closely to stringent governmental regulations. Incorporating a hyperbaric chamber into our lifeboats, Vanguard has the perfect solution for divers who need to maintain their atmospheric pressure during an escape from a hazardous situation. |
Company: Vector Technology Group Stand: E36 Distinctive Features: - Superior ROV operated subsea connector - Deep and Ultra Deep waters - Developed in close collaboration with some of the industry’s major operators - Revolutionary Duoseal Sealring Technology - Enhanced Misaligmnment Capability - Unique angular and axial tolerance - Ideal for applications like tree and manifold connections, flowline jumper installations, retrievable choke connections, and pipeline tie-in and repair. |
Company: Velocious Stand: A27 Distinctive Features: Fully configurable to geometrically represent various industry standard ROV’s encompassing manufacturers such as Schilling, Perry Slingsby, Subsea 7, SMD, Fugro & Oceaneering. Industry standard equipment onboard includes Schilling Titan & Rigmaster Manipulators, Konsberg camera Systems. Fully equipped/ready to deploy transportable control centre including features such as, MROV storage, workshop facilities, A/C, operator station, monitors, pc’s, video equipment, first aid station. |
Company: Veripos Stand: R37 Distinctive Features: VERIPOS LD5 is the latest state-of-the-art and user friendly GNSS positioning unit with onboard colour display and intuitive menu structures. Available in a number of configurations, from a basic L-band demodulator to a fully integrated mobile positioning unit with demodulator and multi-frequency GNSS receiver. The unit can easily be upgraded to different configurations depending on your requirements. |
Company: Voith Turbo Stand: W28 Distinctive Features: The new ultra cool hydrodynamic bearings from Voith Turbo BHS keep temperatures up to 15 °C lower than in standard fixed profile offset or tilting-pad bearings, even at a reduced oil flow rate and higher efficiency. They are applied in demanding oil & gas applications where high loads of 3.4 MPa and pitchline velocities up to 100 m/s occur. |
Company: Voltex Power Engineers / Stucke Elektronik Australia Stand: Foyer 26 Distinctive Features: SYMAP® multifunctional relays provide a full range of protection features, programmable via PC software or user friendly HMI with large graphic display. Made in Germany, with LR approval, they are ideal for all O&G applications. An integrated Power Management System provides full generator control and load management with multiple reduncancy. IEC61850 options with GOOSE messaging available for smart grid applications. |
Company: WEG Australia Stand: L6 Distinctive Features: MVW01 is designed to control medium voltage induction motors. It features unique innovations, combining hardware robustness with simplicity, reliability and safety in a compact solution with few components and state-of-the-art generation technology. MVW01 follows the same programming philosophy of the WEG LV inverter line,simplifying its application. Motor voltage:2.3 kV,3.3 kV,4.16 kV or up to 6.9 kV |
Company: Weir Oil & Gas Stand: W7 Distinctive Features: Suitable applications: Acidizing Coil Tubing Fracturing Cementing Sand Control Well Kill Main Features & Benefits Compact design 15,000psi rated. Meets HSE requirements for safe lifting by a single individual (23.1kg) Available with DNV certification on request. CE compliant (92/23/EC) |
Company: WESTRADE AUST Stand: Z1 Distinctive Features: Keystone manufactures fire resistant cables capable of maintaining circuit integrity under extreme heat conditions. In the event of a fire, the unique silicone rubber insulation of the cable transforms into a tough, protective layer, assuring continuous operation of essential fire fighting services at the LNG plant such as alarms, pumps, audible warning sirens and fans for safe evacuation of personnel. |
Company: ZMi P/L Stand: R39 Distinctive Features: Audit/Inspection Based Software Installed on to ruggedised tablet PC's Removes the need for paper based workpacks. |
Company: ZTT Stand: G1 Distinctive Features: Telecommunication cable undersea. |
.jpg "Alstom Logo"){kind=small}
